FERRODAY Half-Inch NPT Kettle Dial Thermometer
Compare a complete analog thermometer when a local dial reading is the actual need.
Read the differences ↗Yosoo · Temperature & pH
Yosoo 1/2 NPT Stainless Thermowell
A closed-ended metal pocket for a separate temperature probe, with a male pipe-thread mounting connection.
Price & purchase ↓
The equipment in use
How this item fits your brewing setup
This is a thermowell: a closed-ended pocket that receives a separate temperature probe. Choose it when your installation calls for a metal barrier between that probe and the liquid. The supplied part has no sensor, display or controller, so it cannot show a temperature by itself.
The specified connection is 1/2 NPT male. Match the thread type as well as the nominal size to the receiving port; the number does not describe the probe bore. The open end must also accept your probe diameter and length, neither of which is established as a universal fit.
The listing specifies 201 stainless steel. That is a material choice to check against the liquid and cleaning process you intend to use, rather than a reason to assume the part is 304 or 316 stainless. The illustrated 12.1 cm dimension spans the whole part, including the mounting section; it is not a confirmed immersion length.
Choose a complete threaded dial such as the FERRODAY if you need an instrument with a visible reading. Choose this thermowell only when you already have, or are selecting, a compatible probe and measuring instrument. The mounting seal and vessel-wall arrangement still need to suit the installation.
The selected reference
Specifications & supplied details
- Brand
- Yosoo
- Supplied part
- One thermowell
- Connection
- 1/2 NPT male
- Declared material
- 201 stainless steel
- Illustrated overall length
- 12.1 cm
Before and during use
Advice for this reference
Before you choose
Confirm probe bore, insertion length and receiving thread before purchase.
Also check
Check that 201 stainless suits your liquid and cleaning requirements.
Documented use & care
The selected care field says wipe clean; no specific chemical compatibility or hot-cleaning cycle is established.
Connections & scope
Fit and useful limits
- No probe, digital display or controller is supplied.
- Overall length does not establish immersion depth; no standalone resolution, accuracy or 500 ms response is adopted.
Questions about this product
What else should you know?
Can I connect this part directly to a temperature display?
The display needs a compatible sensor. The thermowell is a passive pocket, not a wired probe.
Does 1/2 NPT tell me which probe will fit inside?
No. It describes the mounting thread. Check the internal bore and usable insertion length separately.
Do I need the three-piece mounting kit as well?
That depends on the vessel port. An existing suitable threaded fitting and an unthreaded wall require different mounting arrangements; neither is confirmed by the thermowell thread alone.
A different choice for a different need
Compare the relevant alternatives
Field’s Hobby Three-Piece 1/2 NPT Thermometer Mounting Kit
Consider the separate mounting hardware only after checking the wall and thread arrangement; joint fit has not been established.
Read the differences ↗Continue choosing