FERRODAY GM-M-504 Two-Roller Malt Mill, No Base Plate
Choose a two-roller mill with stainless rollers and a smaller 7.7 lb hopper, also requiring a separate support.
Read the differences ↗Homebrewers Outpost · Grain mills
Homebrewers Outpost MILL710 MaltMuncher Three-Roller Grain Mill
A manual malt mill with a larger hopper and an adjustable lower roller, requiring a separate supporting mount.
Price & purchase ↓
The equipment in use
How this item fits your brewing setup
The MILL710 MaltMuncher supplies three rollers, a grain hopper and a hand crank. Choose it when the three-roller arrangement and larger hopper are useful to your brewing workflow. Manual operation is provided; the optional drill or motorized arrangements are separate equipment.
The selected hopper specification is 12 lb, and the rollers are described as 5 in long by 1.25 in diameter. The maker identifies an adjustable lower roller for refining the crush. Check the supplied adjustment scale and choose a setting appropriate to the malt and process, rather than relying on a universal grain-crushing setting.
The body and hopper are specified as 6061 aluminum with cold-rolled steel rollers. Those rollers should not be described as stainless. KegLand’s instructions for the corresponding KL03261 model say to keep them dry and brush out the mill after use; wet conditioning can lead to premature rust.
The supporting base board is optional, so plan a suitable mount and a collection vessel rather than assuming a freestanding unit. Compare the FERRODAY when a two-roller arrangement, stainless rollers and 7.7 lb hopper better suit your needs. The capacity and roller count describe the equipment without promising a particular throughput or extraction result.
The selected reference
Specifications & supplied details
- Offer brand
- Homebrewers Outpost
- Model
- MILL710 MaltMuncher
- Corresponding maker model
- KegLand KL03261
- Roller arrangement
- Three rollers, adjustable lower roller
- Roller specification
- Cold-rolled steel,5 in long ×1.25 in diameter
- Body and hopper specification
- 6061 aluminum
- Hopper specification
- 12 lb grain
- Supplied manual drive
- Hand crank
- Support
- Base board optional, separate from selected mill
Before and during use
Advice for this reference
Before you choose
Plan a stable supporting mount and a separate collection vessel.
Also check
Choose dry brewing malt and an appropriate crush setting; no universal gap or throughput is established.
Documented use & care
Keep the rollers dry and brush remaining grain out after milling.
The maker warns that wet conditioning can cause premature roller rust. Follow its dry-care instructions when deciding how this mill fits your cleaning routine.
Connections & scope
Fit and useful limits
- Confirm the adjustment range if you need a specific roller gap. This offer states 0–0.63 in, while the corresponding distributor information states 0–0.063 in; the decimal difference matters when comparing mills.
- Budget separately for the supporting base, collection vessel and any drill or motor. These are cold-rolled steel rollers for brewing malt; choose equipment specifically documented for whole corn or flour if that is your intended task.
Questions about this product
What else should you know?
Can I operate it without buying a motor?
Yes. A hand crank is supplied. A motor or drill is an optional separate drive arrangement.
How should I plan for a grain bill larger than the hopper?
The hopper is specified for 12 lb of grain. Compare your full grain bill with that capacity when planning hopper loads; it does not specify how quickly the mill processes the grain. A motor, support and collection vessel are separate considerations.
Should I rinse the rollers after use?
The maker says to keep them dry and brush the mill out. Its warning about wet grain and rust is relevant to the cold-rolled steel rollers.
A different choice for a different need
Compare the relevant alternative
Continue choosing